Limestone 20 Detailed Half Model - Scale: 1.2"=1'
This is my first model of a power boat.  This model is a fully detailed 1/10th scale half model of a Limestone 20 Cuddy built by Medeiros Boats in Canada.  The boat was designed by Mark Ellis, who provided both the hull and deck lines I used to build the model.

This picture shows the full model with the VHF whip in place.  You can see that this boat has a VolvoPenta I/O engine and a tan canvas bimini top.

Here is a mid-ships close-up showing the rope rub rail and the details of the bimini frame.  You can also just read the "Limestone" nameplate.  The lift strips on the bottom are also quite evident in this picture.

Here is an aft picture that shows the outdrive, teak swim platform and other transom details.

Here is another stern picture showing the engine cover with its vinyl cushion.  You can also see the vinyl cushion on the outboard seat adjacent to the engine cover.  If you look closely you can see the electrical panel with its switches next to the wheel.

This bow-on picture shows the details of the foredeck.  Note the bow light, bow rail, cabin top hatch and the steering station.

Finally, I kept track of the time I spent on this model.  All together it came to 105 hours.

Return Main Pagesetstats